Abstract:
The conversion of coal to a hydrophilic state presents a significant challenge for process engineers, especially when treating oxidized coals in flotation-based beneficiation plants. Flotation of oxidized coal often requires a substantial consumption of oily collectors, resulting in unacceptably low yields. To address this, several pre-processing methods have emerged for coal deoxidation, including mild grinding, surface activation, and ultrasonic or microwave treatment. However, their effective application depends on a thorough understanding of the degree of oxidation in the coals. Therefore, it is crucial to gain insights into the nature of oxidized coal before initiating the deoxidation process. This present study provides various characterization techniques such as XRD, SEM-EDS, FTIR Spectroscopy, Raman Spectroscopy, TGA, and Zeta Potential Analysis employed on oxidized low-grade coals. The study revealed that the proximate analysis of low-grade coals KC, DC, RC, and PC contains varying ash percentages of 32.65%, 44.47%, 25.44%, and 37.53%, respectively, with SiO2 and Al2O3 comprising over 80% of the total ash. XRD characterizations identified quartz and kaolinite as major mineral phases in all samples, while SEM-EDS confirmed rough coal surfaces with peeling, off-white aggregations, and surface pores. HGI value ranging from 80 to 91 was attributed to partial decomposition and surface cracking due to oxidation. FTIR spectra revealed pronounced oxidation behavior, with strong -OH peaks in the 3600-3700 cm-1 range. Zeta potential analysis affirmed the oxidized nature of the coals with a pH below 3.1 and an extremely negative zeta potential beyond 3.1. The findings mentioned above showcase the distinct characteristics of oxidized low-grade coals, which serve as crucial indicators for exploring coal beneficiation, especially through the flotation process.