Non-coking coal is used for metallurgical and cement industries apart from generating energy. Indian non-coking coals are high in ash content because of drift origin. These high ash coals require beneficiation before being used. Jigging is one of the unit operations used for beneficiation of coal. Beneficiation by jigging is carried out for the coarser size of particles. Jigging of fine size coal is limited. However, in present study two fine non-coking coal samples having sizes -3+2 mm and -2+1 mm were used for jigging study. In present study jigging experiments were performed using laboratory Denver mineral jig by varying feed size, water rate, and feed rate. 2(3) full factorial experimental design was used to study the performance of jigging operation. The performance of jigging was judged by statistical analysis; where ash content and combustible recovery of concentrate were considered to be responses. In addition to statistical analysis, optimization study was also carried out by Nelder-Mead multidimensional pattern search method. Statistical models developed in the present study could predict ash content and yield of the concentrate accurately. At optimized condition, it was possible to achieve 22.6% ash content with 64.15% combustible recovery. (C) 2016 The Society of Powder Technology Japan. Published by Elsevier B.V. and The Society of Powder Technology Japan. All rights reserved.
Copyright:Copyright [2016]. All efforts have been made to respect the copyright to the best of our knowledge. Inadvertent omissions, if brought to our notice, stand for correction and withdrawal of document from this repository.