| dc.contributor.author |
Mishra, S.C. |
|
| dc.contributor.author |
Nayak, B.B. |
|
| dc.contributor.author |
Mohanty, B.C. |
|
| dc.date.accessioned |
2018-10-01T12:21:50Z |
|
| dc.date.available |
2018-10-01T12:21:50Z |
|
| dc.date.issued |
2001 |
|
| dc.identifier.citation |
Surface & Coatings Technology, 145(1-3), 2001: 24-30 |
|
| dc.identifier.issn |
0257-8972 |
|
| dc.identifier.uri |
http://ore.immt.res.in/handle/2018/928 |
|
| dc.description.abstract |
Arc plasma nitriding of low carbon steel was carried out in the temperature range 1000-1100 degreesC under different gas (Ar, N-2, H-2) configurations for 15 min each. The plasma nitrided surfaces were characterized by XRD, SEM and microhardness measurement to identify various nitride phases thus grown, observe surface morphology of grains and determine improvement in hardness, respectively. The depth of the nitride layer growth was found to be in the order of 100-120 mum. Microhardness was observed to increase by three to four times that of the original samples taken. Fe2-3N(epsilon), Fe2N1-x, and Fe2N, etc., were the main phases that grew in the are plasma process. Experimental details and characterization of are plasma nitrided low carbon steel are described and discussed in this paper. (C) 2001 Elsevier Science B.V. All rights reserved. |
|
| dc.language |
en |
|
| dc.publisher |
Elsevier |
|
| dc.relation.isreferencedby |
SCI |
|
| dc.rights |
Copyright [2001]. All efforts have been made to respect the copyright to the best of our knowledge. Inadvertent omissions, if brought to our notice, stand for correction and withdrawal of document from this repository. |
|
| dc.subject |
Materials Sciences |
|
| dc.subject |
Physical Sciences |
|
| dc.title |
Arc plasma nitriding of low carbon steel |
|
| dc.type |
Journal Article |
|
| dc.affiliation.author |
Reg Engn Coll, Dept Met, Rourkela 769008, India |
|