Performance evaluation for selectivity of the flocculant on hematite in selective flocculation

Abstract

Increased demand for iron ore necessitates the utilization of low-grade iron ore fines, slimes, and existing tailings. Selective flocculation can be an alternative physico-chemical process for utilizing these low-grade fines, slimes, and tailings. In selective flocculation, the most critical objective is the selection of proper reagents that will make floc of desired minerals. In present study, selective flocculation was applied to ultra-fine synthetic mixtures of hematite and kaolinite, and the Fe value was upgraded up to 65.78% with the reduction of Al2O3 and SiO2 values to 2.65% and 3.66%, respectively. Here, degraded wheat starch was used as a flocculant. In this process, separation occurs on the basis of the selectivity of the flocculant. The selectivity of the flocculant can be quantified in terms of separation efficiency. Here, an attempt was also made to develop a correlation between separation efficiency and major operating parameters such as flocculent dose, pH value, and solid concentration to predict the separation performance.